Configuring Missing alarm
The Missing alarm tracks any selected object and initiates an alarm if the object has been re-
moved/moved from its original position.
Please note that the Missing alarm option will not be available in the crowded locations.
To configure Missing alarm, do the following:
1.
Choose Missing in the Alarm menu
Note
All Objects must be chosen in the Object Type menu in order to activate
Missing alarm type.
2.
Repeat steps 2-6 of the Area alarm setup
3.
Configure the Missing Alarm Setting for the selected detection zone. Set the Area
Change Percent (0% - 100%). The higher the number, the more profound the change
in the defined area has to be in order to set off the alarm. To detect the item being moved
slightly from its original position, the Area Change Percent number should be set to a
lower value.
Configuring Stop alarm
The Stop alarm detects a human/vehicle and initiates an alarm if the detected human/vehicle
stops in the defined area for a period of time longer than that defined by user.
Please note that the Stop alarm option will not be available for the overhead-mounted cameras
and in the crowded locations.
Note
Human or Vehicle must be chosen in the Object Type menu in order to activate Missing
alarm type. Stop alarm will not work with All Objects object type.
To configure Stop alarm, do the following:
1.
Choose Stop in the Alarm menu
2.
Repeat steps 2-6 of the Area alarm setup
3.
Configure the Stop Alarm Setting for the selected detection zone. Set the Period of
Time, in hours, minutes and seconds that a human/vehicle is allowed to stop for in the
defined area. Once the person/vehicle stops in the defined area for the period of time
longer than defined by user, the alarm will be triggered.
91
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/