Intelli-Guard™ detects change in an image by analyzing its pixels. The same principle is used
by the Motion Detection feature. However, Intelli-Guard™ can yield a more precise response
than Motion Detection, as it can be adjusted to different kinds of motion. For instance, an object’s
size and direction of movement can be used to determine the triggering of an alarm. Motion De-
tection, on the other hand, recognizes and registers any type of motion.
Note that Intelli-Guard™ uses the e-mail address configured in the Email Setup and the Emergency
phone numbers configured in Communication Setup. Make sure to configure the appropriate
Setup tabs.
Intelli-Guard™ provides two types of motion detection: Surveillance (up to 6 target zones) and
Count (up to 3 detection zones).
Important: Count is only available when PACDM™ is installed. The Surveillance motion detection
mode is the default option for the DVMS with no PACDM™ installed. The Surveillance type of
motion detection can trigger an audio alarm, an emergency E-mail or a phone call in response
to the detected motion. The Count type of motion detection counts the number of motions in the
specified region and exports this data to the P.O.S. database.
•
Example of Surveillance type of motion detection: a motion detected in the restricted area
of the warehouse will trigger an audio alarm, emergency E-mail or a phone call.
•
Example of Count type of motion detection: DVMS will count the number of cars entering
a fast food restaurant’s "Drive Through". This number is then exported to the P.O.S.
database and can provide the managers with important statistics for use in strategic
marketing.
Up to 6 Surveillance target zones (Areas) and up to 3 Count detection zones (Gates) can be set
for each individual camera. Every detection/target zone has its own parameters that have to be
adjusted and saved individually.
70
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
