manualshive.com logo in svg

i3DVR International i3-SRX Series, User Manual

Share
Download
i3DVR International i3-SRX Series User Manual Download Page 121

Manual Backup

i³ backup types:

1.

Snapshot (single frame / still image)

2.

Encrypted (video can only be viewed with i³Remote Software). One minute of the En-
crypted video backup is always 66 megabytes.

3.

AVI (video can only be opened by AVI viewers). One minute of the AVI video backup
can fluctuate between 1.3 megabytes and 2.5 megabytes depending on the recording
settings.

4.

Email (a single frame or a 1 min. long video will be e-mailed as an attachment)

Note

Please avoid using CD-RW/DVD-RW.

Snapshot Backup

Snapshot backup allows saving a single frame as a still image on any local drive in both *.bmp
and *.JPEG formats.

To save a still image (Snapshot), do the following:

1.

Stop the video playback on the exact frame 

2.

Click the desired camera to show it separately in the display window

116

Backup on i³Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at 

http://www.renderx.com/

Summary of Contents for i3-SRX Series







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands