Setup for individual camera
To set up each individual camera, do the following:
1.
Click the camera number. The chosen camera will be displayed in the live view screen.
2.
Set the camera’s Sensitivity. The greater the Sensitivity, the less change in an image
is needed to set off the alarm. If the Sensitivity is set to Less, the change in an image
will have to be dramatic to be detected as motion. This function only works properly in-
doors. The natural changes in the outdoor environment (e.g. clouds) can cause false
alarms.
3.
Check the Alarm checkbox to enable the internal speaker alarm for the Motion Detection
4.
Set the Active Time for the Alarm. If the motion is detected outside of the active time,
the Alarm will not go off. In this example, the Alarm is always active.
5.
Check the Control checkbox to enable the control association for the chosen camera
23
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/