6.
Choose the control number to be associated with the Motion detection on the chosen
camera. In the example above, the Control 2 will be activated if any motion is detected
on the selected camera.
7.
Set the Dwell Time for the control feature. This is the length of time that the control will
stay on if activated by Motion detection. In the example above, the control will stay on
for 5 seconds.
To draw the Motion detection zones on the selected camera, do the following:
1.
Place the cursor at the starting point on the live view screen
2.
Hold down the left mouse button and drag to draw a rectangular area. Up to 5 motion
detection zones can be configured.
3.
Adjust the area if necessary
4.
Click Area Clear to reset all motion detection zones on a specified camera
5.
Click Area Draw to set the entire camera screen for motion detection
Individual Camera Adjustment
1.
Set the Brightness, Hue and Contrast for the selected camera
2.
Choose between Color and Monochrome recording. Color recording provides the
realistic video images. Monochrome is best suited for low light conditions, such as
nighttime recording.
3.
Click Default to reset the Brightness, Hue and Contrast values back to 0
Setup For All Cameras
To set the motion detection zones for all cameras, do the following:
1.
Click Area Draw to select entire screen on all cameras for motion detection
2.
Click Area Clear to clear all selected zones on all cameras. This will disable motion
detection.
24
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/