4.
In the Emergency Setup, define which cameras/sensors will cause an alert. In this ex-
ample, if the motion is detected on Cameras 1,3 and 7 or if the Sensors 2-4 are triggered,
an alert will be sent.
5.
Choose Emergency Phone Numbers to receive an alert via telephone. The first number
is the default number for all emergency communications. The second number is a backup
number in case the first one fails. These numbers are also used by the Intelli-Guard™
for Auto Dial-Out.
6.
Choose an Emergency IP Address to receive an alert on the Emergency Monitor soft-
ware installed on the same or another system.
7.
Set Transfer Time. Transfer Time specifies the time in seconds between the detected
motion (triggered sensor) and the alert transmission. In the example above, the alarm
will be sent to the Emergency IP address 90 seconds after the sensor has been triggered.
Related Topics: Sensor Setup | Motion Setup | Intelli-Guard™ | VideoLogix™
Server Information
Overview
The Server Information tab permits configuring the Server, as well as obtaining information about
the Server, the DVMS, and the exporting/importing settings. Setting the system time is also done
on this tab.
33
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/