4.
Choose between Monochrome and Color modes of recording
Note
All the changes in the Individual Camera Adjustment menu will be copied to
the Motion Setup tab.
5.
Choose the Control Output for the Intelli-Guard. When the alarm is triggered through
the Intelli-Guard, the selected control will be activated.
6.
Choose Surveillance or Count
Surveillance target zone (Area) configurations
Each target zone has its own configuration and has to be saved individually. The Area menu
specifies which target zone is currently selected. To switch between target zones, select the
chosen target zone by clicking on its green box in the live view screen.
1.
Define the target zones in the live view screen on the left. Up to 6 target zones (Areas)
can be configured
a.
Place the mouse cursor at the start point over the live-mode camera view on the
left
b.
Hold down the left mouse button and drag the cursor to draw the rectangular target
zone
c.
Let the mouse button go
d.
Adjust or move the created target area if necessary
2.
Check the Send Email checkbox to have an emergency Email sent every time that the
alarm is triggered in this Area. The email address used, is from the Email Setup tab.
72
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/