Configuring Preset Touring & Alarm / Preset Setup
To set up the Preset Touring, do the following:
1.
Program all desired presets in the PTZ mode
2.
In PTZ mode, check all the presets that will be used in the Preset Touring sequence.
3.
In PTZ mode, click Preset Touring
4.
The Preset Touring will become Stop Touring. Click Stop Touring to stop camera
touring.
5.
Exit PTZ mode
6.
In Hardware Setup, enter the Working Time value. This will configure the time that the
PTZ camera will remain at each preset. In the above example, the PTZ camera will remain
at each preset for 5 seconds.
7.
Click Alarm/Preset. The Alarm/Preset window will appear.
8.
Configure the Preset for each camera related to the sensor number that will activate the
specified preset. In example below: Sensor 1 activates Preset 4 on Camera 1; Sensor
2 activates Preset 9 on Camera 5; Sensor 4 activates Preset 1 on Camera 7; Sensor 5
activates Preset 5 on Camera 2.
21
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/