![background image](http://html1.mh-extra.com/html/alibi/ali-qvr5016h/ali-qvr5016h_quick-setup-manual_2896313001.webp)
1
ALI-QVR5016H_SQ
170707
Item
Description
VIDEO OUT
(CVBS, VGA, HDMI)
CVBS - BNC connector for video output
VGA - DB15 connector for VGA compatible monitor. See specifications for supported resolutions.
HDMI - Two HDMI connectors for an HDMI compatible monitors. See specifications for supported resolutions.
LINE IN
RCA connector for audio input
RS-485, ALARMS IN/OUT
See below, next topic
Power connector
AC 100V ~ 240V power supply.
ON / OFF Switch
Switch for powering the device on or off
GROUND
Terminal for ground. Connect to earth ground before powering on the DVR.
LAN Interface
2 x 10/100/1000BASE-T Ethernet network interface
USB interface
Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk Drive (HDD).
AUDIO OUT
CVBS AUDIO OUT - RCA connector for audio output. This connector is synchronized with CVBS video output
VGA AUDIO OUT - RCA connector for audio output. This connector is synchronized with VGA video output
HD-TVI video inputs
HD-TVI interface for video input
RS-485, ALARMS IN/OUT
Item
Description
RS-485 (T+, T-, R+. R-)
T+ and T- pins connect to R+ and R- pins of PTZ receiver respectively.
KB
Controller port:
D+, D- pin connects to Ta, Tb pin of controller.
For cascading devices, the first DVR’s D+, D- pin should be connected with the D+, D- pin of the next DVR
ALARM IN (1 through 16)
Alarm inputs 1 - 16. Alarm input is tied to ground through the alarm sensor. See
“Step 3. Connect alarm devices to the DVR” on page
2
for more information.
ALARM OUT
(1-G through 4-G)
Alarm outputs 1 - 4 with ground terminations. See
“Step 3. Connect alarm devices to the DVR” on page 2
for more information.
This guide provides instructions to initially setup the ALI-QVR5016H digital video recorder (DVR) for AHD, HD-TVI, and 960H analog and
IP cameras. For information about using your QVR and its extensive capabilities, refer to the
Alibi Embedded Network Video Recorder
Firmware V3.4.x User Manual
provided at
www.alibisecurity.com/resources
.
For more information
, refer to these documents - available from your equipment vendor:
•
ALIBI™ Tools Utility Installation and User Manual
•
ALIBI™ Witness Smartphone App for Android - Quick Start Guide
DVR Front Panel
USB Interface
Power LED
Status
TX / RX
ALI-QVR5015H front panel
Item
Usage
Power LED
Indicator turns green when DVR is powered up.
Status
STATUS indicator lights in red when HDD is reading / writing.
TX / RX
LED indicator blinks green when network connection is functioning properly.
USB Interface
This port can be used for a USB mouse or USB flash memory devices.
DVR Back panel
Camera video inputs
LAN (2)
RS-485,
Alarms IN/OUT
Power connector Fan outlet
ON / OFF switch
Video Out - HDMI (2), VGA
CVBS Video Out
CVBS, VGA Audio Out
Audio Line In
Camera Audio In
Ground
RS-232
eSATA
USB
Item
Description
eSATA
Connects external SATA HDD, CD/DVD-RW
RS-232 Interface
DB9 (male) connector for RS-232 devices
ALI-QVR5016H 16-Channel AHD, Analog, HD-TVI, 960H and IP Camera Recorder Quick Setup Guide