84
Recording Surveillance Video
After
huperRemote
has connected to the DVR sites that you specified, the remote cameras
on each site are, by default, all selected for monitoring only. You can record video from all
cameras, or choose certain cameras to record video from.
To record video from all remote cameras:
Click
. Surveillance video from all remote cameras of the connected DVR sites will be
recorded to your local hard drive. Click this button again to stop the recording.
Triggering Manual Events to Remote Cameras
If you see abnormal activities on one of the remote cameras, you can manually trigger an
event to that camera. To do so, first click the split screen that displays the remote camera.
Then click
to trigger a manual event to the camera. This allows the abnormal
activities to be logged and/or digitally recorded.
To record video from selected cameras only:
1. Click a camera on the split screen to select it.
2. In the Camera List Panel, click
to start the recording. Click this button again to
stop the recording.
A check mark in
the DVR site name
indicates that all
cameras under the
site are selected for
monitoring.
A red box in the
DVR site name
indicates that only
some cameras are
selected for
monitoring.
Note:
In the
Preferences dialog box: Storage tab
, you can delete old video recordings, and also specify
when you want hard disk space to be recycled to free up disk space for saving new recordings.
(See page 101 for details).
Note:
The "Manual trigger" option of the remote camera must be enabled first at the DVR server.
Summary of Contents for huberDVR 2400
