79
Ch.5 huperRemote
Chapter 5
provides up to 16 split screens on the user interface for you to simultaneously
monitor remote cameras from multiple DVR sites. Each DVR site will have a DVR server
computer that is connected to surveillance cameras and other security devices. You need to first
specify the URL addresses and the login details of the DVR servers that you would like to
connect to.
1. Click
to open the
Connect
dialog box.
2. Enter the DVR site's URL address in the
Site Server
text box.
3. Clear the
Guest
login checkbox, then type in
the valid
User name
and
Password
for
connecting to the DVR site.
4. Select
Add to connection list
to add the
DVR site to huperRemote's
Camera List
Panel
, then click
OK
. huperRemote will
then connect to the specified DVR site and
display the remote cameras.
5. The DVR site will be added to the Camera
List Panel. Click
to open this panel. To
see the names of the different cameras in the
DVR site, click on the “+” sign.
6. By default, the site is named with the site
name that has been specified in the remote
DVR site. To rename it, click on the text
and type in the desired name.
7. huperRemote allows you to connect to
multiple DVR sites at the same time. Repeat
steps 1 to 6 to add more DVR sites.
Note:
If you want to change the information of a DVR site, select then right-click the DVR site name
in the Camera List Panel. The
Site Information
dialog box will then open where you can make
modifications.
Connecting to Remote DVR Sites
To add and connect to a remote DVR site:
Summary of Contents for huberDVR 2400
