Huper huberDVR 2400, User Manual, Page: 54 / 249

54
Ch.2 Site Server
1
2
6
7
8
1
2
3
4
5
Card Select an I/O card from the drop-down list. Different I/
O cards have different number of analog input ports.
Enable/Disable checkboxes Select the checkboxes of sensors whose analog input will
be monitored. Or, clear the checkboxes to disable
connections to the sensors.
Scan interval Specify the interval (in seconds) for scanning input ports
periodically.
Name Specify the sensor name (for instance, the location where
the sensor is installed).
Type Select an input type: NC (Normal Close) or NO (Normal
Open).
Gain Specify the sensor’s input voltage range.
From/To Specify the time period for monitoring the sensor’s
analog input.
Test Click this button to open the "Sensor test" dialog box to
view the actual analog input voltage value.
The Sensor test dialog box allows you to check the
connection status of input devices. The sensor input type
and the current voltage value are displayed. You can try
each input devices and inspect the voltage to check if the
connections between input devices and Site Server are
well connected.
Configuring output devices (Output tab)
In the " Output " tab, at most 16 output devices can be enabled and customized. The following
describes the settings that can be customized.
Card Select an I/O card from the drop-down list. Different I/
O cards have different number of analog output ports.
Enable/Disable checkboxes Select the checkboxes of devices to connect to, or clear
the checkboxes to disable connections to the devices.