manualshive.com logo in svg

Huper huberDVR 2400, User Manual, Page: 228 / 249

Share
Download
Huper huberDVR 2400 User Manual Download Page 228

12

Ch.2  Using huperRemote

Panel Controls

At the bottom of the Camera List Panel are two sets of button controls:

The Camera List Panel

The 

Camera List Panel

 lists the DVR sites and customized camera groups that you can

connect to. At the bottom of the panel are button controls for adding DVR sites or camera
groups, connecting/disconnecting selected cameras, video recording, and more.

To expand the Camera List Panel, click 

 . To retract and change it back to the normal

panel size. click 

 again.

Expanded Camera List Panel

Normal-size Camera List Panel

Allows you to connect to the selected remote cameras (that is, the cameras with
check marks in the Camera List Panel).

Starts recording surveillance video from the selected cameras of a DVR site onto
your local hard drive. Click again to stop recording.

Click to refresh the camera list of a selected DVR site.

Summary of Contents for huberDVR 2400


























































































































































































































































Reviews:

No comments