Huawei UPS5000-H Series User Manual Download Page 3

Page: 3 / 395

About This Document

Purpose

This document describes the UPS5000-H-(1200 kVA–1600 kVA) in terms of its

features, performance specifications, working principles, appearance, structure,

installation, and operation and maintenance (O&M).

Intended Audience

This document is intended for:

●

Sales engineers

●

Technical support engineers

●

System engineers

●

Hardware installation engineers

●

Commissioning engineers

●

Data configuration engineers

●

Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which,

if not avoided, will result in death or serious

injury.

Indicates a hazard with a medium level of risk

which, if not avoided, could result in death or

serious injury.

UPS5000-H-(1200 kVA-1600 kVA)

User Manual (100 kVA Power Modules)

About This Document

Issue 05 (2021-10-13)

Summary of Contents for UPS5000-H Series












































































































































































































































































































































































































Search results

Summary of Contents for UPS5000-H Series

Reviews:

Related manuals for UPS5000-H Series

Brands by name

Popular brands

Huawei UPS5000-H Series, User Manual

Search results

Summary of Contents for UPS5000-H Series

Reviews:

Related manuals for UPS5000-H Series

Brands by name

Popular brands