Huawei UPS5000-H Series User Manual Download Page 61

Page: 61 / 395

Figure 4-2 Appearance

(1) Running indicator

(2) Battery cold start button

(3) Alarm indicator

(4) Ready switch

(5) Fault indicator

(6) Bypass modules

(7) Bypass control module

(8) Auxiliary power supply

(9) Crowbar

Table 4-3 Indicator description

Indicator

Color

Status

Description

Running

indicator

Green

Steady on

The system is working in bypass mode.

Blinking

slowly

The bypass has no output (blinking at

0.2 Hz, on for 2.5s and off for 2.5s).

Blinking

fast

The bypass is not configured or the

software is being upgraded (blinking at

4 Hz, on for 0.125s and off for 0.125s).

Off

The bypass software is being upgraded.

Alarm

indicator

Yellow

Steady on

A minor alarm is generated for the

bypass.

Off

There is no minor alarm for the bypass,

or the software is being upgraded.

Fault

indicator

Red

Steady on

A critical alarm is generated for the

bypass.

Off

There is no critical alarm for the bypass,

or the software is being upgraded.

UPS5000-H-(1200 kVA-1600 kVA)

User Manual (100 kVA Power Modules)

4 Component Description

Issue 05 (2021-10-13)

Summary of Contents for UPS5000-H Series












































































































































































































































































































































































































Search results

Summary of Contents for UPS5000-H Series

Reviews:

Related manuals for UPS5000-H Series

Brands by name

Popular brands

Huawei UPS5000-H Series, User Manual

Search results

Summary of Contents for UPS5000-H Series

Reviews:

Related manuals for UPS5000-H Series

Brands by name

Popular brands