Huawei UPS2000-G Series User Manual Download Page 5

Page: 5 / 194

Issue 11 (2017-11-27)

Updated the section "Operating Environment."

Issue 10 (2017-01-19)

●

Added the DHCP feature.

●

Changed the default value of Max. current parameter to 2.0 A.

Issue 09 (2016-10-10)

Upgraded the software version.

Issue 08 (2016-01-06)

Upgraded the software version.

Issue 07 (2015-03-30)

Updated the content about alarm handling.

Issue 06 (2014-10-09)

Added the shutdown delay feature.

Issue 05 (2014-07-31)

Updated optional components.

Issue 04 (2013-11-06)

Added the description in Checking Before Powering On the UPS.

Issue 03 (2013-08-24)

Added the description of the UPS2000-G-15 kVA/20 kVA three-phase input single-

phase output and single-phase input single-phase output.

Issue 02 (2013-06-10)

Upgraded the software version.

Issue 01 (2013-05-15)

This is the first release.

UPS2000-G- (6 kVA-20 kVA)

User Manual

About This Document

Issue 18 (2021-07-16)

Summary of Contents for UPS2000-G Series



































































































































































































Search results

Summary of Contents for UPS2000-G Series

Reviews:

Related manuals for UPS2000-G Series

Brands by name

Popular brands

Huawei UPS2000-G Series, User Manual

Search results

Summary of Contents for UPS2000-G Series

Reviews:

Related manuals for UPS2000-G Series

Brands by name

Popular brands