Figure 4-33 Self-Load screen
Table 4-23 Self-load settings
Item
Description
Defa
ult
Value
Value
Range
Output
power
ratio
This parameter is used only during the
tests before shipment. This parameter is
configurable only after the inverter is
shut down.
80%
20%–
100%
Self-load
mode
This parameter is used only during the
tests before shipment. This parameter is
configurable only after the inverter is
shut down.
Disabl
ed
Disabled,
Enabled
●
Others screen
Figure 4-34 Others screen
NO TE
The EPO enable setting is available only for the UPS2000-G-15KRTL-01/UPS2000-
G-20KRTL-01. EPO is enabled for the UPS2000-G-6KRTS/UPS2000-G-10KRTS/
UPS2000-G-15KRTL/UPS2000-G-20KRTL by default.
UPS2000-G- (6 kVA-20 kVA)
User Manual
4 Control Panel
Issue 18 (2021-07-16)
Copyright © Huawei Technologies Co., Ltd.
67