Huawei UPS2000-G Series User Manual Download Page 72

Page: 72 / 194

Item

Description

Default

Value

Value Range

Frequency

range

Bypass frequency range.

When the difference

between the bypass

input frequency and the

rated frequency is

greater than this value,

the system determines

that the bypass

frequency is abnormal

and that the bypass is

unavailable.
The Frequency range

parameter is associated

with the ECO frequency

range and must be

greater than the current

ECO frequency range.

This parameter is

configurable only after

the inverter is shut

down.

±2 Hz

±0.5 Hz, ±1 Hz, ±2 Hz,

±3 Hz, ±4 Hz, ±5 Hz,

±6 Hz

●

ECO screen

Figure 4-31 ECO screen

NO TE

You can use the ECO function only if power grid conditions are good and the voltage

and frequency fluctuation is within the specified ECO voltage and frequency range.

UPS2000-G- (6 kVA-20 kVA)

User Manual

4 Control Panel

Issue 18 (2021-07-16)

Summary of Contents for UPS2000-G Series



































































































































































































Search results

Summary of Contents for UPS2000-G Series

Reviews:

Huawei UPS2000-G Series, User Manual, Page: 72 / 194

Search results

Summary of Contents for UPS2000-G Series

Reviews: