Huawei UPS2000-G Series User Manual Download Page 3

Page: 3 / 194

About This Document

Purpose

This document describes the UPS2000-G-(6 kVA–20 kVA)/UPS2000-G-15KRTL-01/

UPS2000-G-20KRTL-01 in terms of features, performance, appearance, structure,

working principle, installation, operation, and maintenance. UPS is short for

uninterruptible power system.

Intended Audience

This document is intended for:

●

Sales engineers

●

Technical support engineers

●

System engineers

●

Hardware installation engineers

●

Commissioning engineers

●

Data configuration engineers

●

Maintenance Engineer

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which,

if not avoided, will result in death or serious

injury.

Indicates a hazard with a medium level of risk

which, if not avoided, could result in death or

serious injury.

Indicates a hazard with a low level of risk which,

if not avoided, could result in minor or moderate

injury.

UPS2000-G- (6 kVA-20 kVA)

User Manual

About This Document

Issue 18 (2021-07-16)

Summary of Contents for UPS2000-G Series



































































































































































































Search results

Summary of Contents for UPS2000-G Series

Reviews:

Related manuals for UPS2000-G Series

Brands by name

Popular brands

Huawei UPS2000-G Series, User Manual

Search results

Summary of Contents for UPS2000-G Series

Reviews:

Related manuals for UPS2000-G Series

Brands by name

Popular brands