Page 150
Configuring Class of Service
Figure 108. DSCP CoS Global Mapping Configuration Page
Table 81. DSCP CoS Global Mapping Configuration Fields
Click
Apply
to update the switch configuration. Your changes take effect immediately but are not
retained across a switch reset unless you click
Save Configuration
.
Field
Description
IP DSCP Values
Lists the IP DSCP values to which you can map an internal traffic class. The values range
from 0-63.
Traffic Class
The traffic class is the hardware queue for a port. Higher traffic class values indicate a higher
queue position. Before traffic in a lower queue is sent, it must wait for traffic in higher queues
to be sent. Valid range is 0 to 3.
