manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 76

SNMP

SNMP View Entry

Use the SNMP View Entry page to configure SNMP views. These SNMP views allow network manag-
ers to control access to different parts of the MIB hierarchy permitting or denying access to objects.
Once configured, views are associated to access control groups to complete access privileges.
To access the SNMP View Entry page, click 

System > Advanced Configuration > SNMP > View

Entry 

in the navigation menu.

Figure 49. SNMP View Entry Page

Table 33. SNMP View Entry Fields

Field

Description

View Name

The name that identifies the SNMP view.

OID Tree

The ASN.1 subtree to be included or excluded from the view. 

View Type

Type of access granted to the specified ASN.1 subtree:

Included – Access is granted to this subtree.

Excluded – Access is denied to this subtree.

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

FANATEC PODIUM Quick Manual preview
PODIUM
Brand: FANATEC Pages: 40
H3C Mini Series Manual preview
Mini Series
Brand: H3C Pages: 17
socomec 95333400 Instruction Manual preview
95333400
Brand: socomec Pages: 43
Open Mesh S8-L Quick Start Up Manual preview
S8-L
Brand: Open Mesh Pages: 2
I/O Interconnect SV142P1 User Manual preview
SV142P1
Brand: I/O Interconnect Pages: 27
Exsys EX-1183HMVS-2W Manual preview
EX-1183HMVS-2W
Brand: Exsys Pages: 14
Fairchild FPS FSDH0265RN Manual preview
FPS FSDH0265RN
Brand: Fairchild Pages: 20
NETGEAR GS108P-100NAS Installation Manual preview
GS108P-100NAS
Brand: NETGEAR Pages: 2
Hubner EGS 2 Operating And Assembly Instructions Manual preview
EGS 2
Brand: Hubner Pages: 23
DigitalZone Sound Switcher Installation Manual preview
Sound Switcher
Brand: DigitalZone Pages: 20
Planet XGS-6350-12X8TR Quick Installation Manual preview
XGS-6350-12X8TR
Brand: Planet Pages: 16
D+H GE 650 Set Original Instructions Manual preview
GE 650 Set
Brand: D+H Pages: 16
Exsys EX-1189HMVS-3 Manual preview
EX-1189HMVS-3
Brand: Exsys Pages: 16
Wave Italy IMPETUS Installation, Use And Maintenance Manual preview
IMPETUS
Brand: Wave Italy Pages: 32
Hama 74011488 Operating Instruction preview
74011488
Brand: Hama Pages: 12
DANLERS EasyZAPP EZ CEFL Installation Notes preview
EasyZAPP EZ CEFL
Brand: DANLERS Pages: 2
iNels RFSAI-62B Quick Start Manual preview
RFSAI-62B
Brand: iNels Pages: 7
Foxun SX-SMX44 Operating Instructions Manual preview
SX-SMX44
Brand: Foxun Pages: 10

Brands by name

Popular brands

Load more brands