manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

LLDP-MED Remote Device Summary

101

Network Policy Information

This section describes the information in the network policy TLVs received in the LLDP-MED frames on this interface.

Media Application Type

The media application type received in the TLV from the remote device. The application types 

are unknown, voicesignaling, guestvoice, guestvoicesignalling, softphonevoice, 

videoconferencing, streammingvideo, vidoesignalling. Each application type that is 

transmitted has the VLAN ID, priority, DSCP, tagged bit status and unknown bit status.
The port on the remote device may transmit one or many such application types. This 

information is displayed only when a network policy TLV has been received.

VLAN ID

The VLAN ID associated with a particular policy type.

Priority

The user priority associated with a particular policy type.

DSCP

The Differentiated Services Code Point value associated with a particular policy type.

Unknown Bit Status

The unknown bit associated with a particular policy type.

Tagged Bit Status

Identifies whether the network policy is defined for tagged or untagged VLANs.

Inventory Information

This section describes the information in the inventory TLVs received in the LLDP-MED frames on this interface.

Hardware Revision

The hardware version advertised by the remote device.

Firmware Revision

The firmware version advertised by the remote device.

Software Revision

The software version advertised by the remote device.

Serial Number

The serial number advertised by the remote device.

Manufacturer Name

The name of the system manufacturer advertised by the remote device.

Model Name

The name of the system model advertised by the remote device.

Asset ID

The system asset ID advertised by the remote device.

Extended PoE

This section describes whether the remote device is advertised as a PoE device.

Device Type

If the remote device is a PoE device, this field identifies the PoE device type of the remote 

device connected to the port.

Extended PoE PD

This section describes the information about the remote PoE powered device.

Required

If the remote device is a PoE device, this field details the remote ports PD power requirement 

in Watts.

Source

If the remote device is a PoE device, this field details the remote ports PoE PD power source.

Priority

If the remote device is a PoE device, this field details the remote ports PD power priority.

Field

Description

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

Dataprobe iBoot PoE-P General Description Manual preview
iBoot PoE-P
Brand: Dataprobe Pages: 31
IBM ThinkPad 600 Product Overview preview
ThinkPad 600
Brand: IBM Pages: 13
IBM Flex System EN2092 Quick Start Manual preview
Flex System EN2092
Brand: IBM Pages: 2
BABBITT LS8000 Owner'S Manual preview
LS8000
Brand: BABBITT Pages: 14
BABBITT LS6000 Owner'S Manual preview
LS6000
Brand: BABBITT Pages: 10
Eaton NR Installation And Operation Instructions Manual preview
NR
Brand: Eaton Pages: 12
UNICOM DynaGST/2402G GEP-33224T-1 Specifications preview
DynaGST/2402G GEP-33224T-1
Brand: UNICOM Pages: 1
UNICONTROL Electronic Cleveland Controls RSS-498-013 Manual preview
Cleveland Controls RSS-498-013
Brand: UNICONTROL Electronic Pages: 2
BERNSTEIN KFM Operating Instructions preview
KFM
Brand: BERNSTEIN Pages: 3
LevelOne FEP-0800 Quick Installation Manual preview
FEP-0800
Brand: LevelOne Pages: 17
SIIG Hi-Speed USB 4-Port Bay Hub Quick Installation Manual preview
Hi-Speed USB 4-Port Bay Hub
Brand: SIIG Pages: 8
H3C WX3010E Installation Manual preview
WX3010E
Brand: H3C Pages: 70
Cypress SE-DVI-8-LC Operation Manual preview
SE-DVI-8-LC
Brand: Cypress Pages: 4
TekTone Tek-CARE NC554/8 Installation Instructions preview
Tek-CARE NC554/8
Brand: TekTone Pages: 2
axing SPU 81-00 Operation Instructions preview
SPU 81-00
Brand: axing Pages: 4
Good Way USB 2-to-6 User Manual preview
USB 2-to-6
Brand: Good Way Pages: 13
MiLAN MIL-S8TA User Manual preview
MIL-S8TA
Brand: MiLAN Pages: 13
Leviton 47693-ESM Product Specifications preview
47693-ESM
Brand: Leviton Pages: 2

Brands by name

Popular brands

Load more brands