manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Port Configuration

39

Port Summary Statistics

The Port Summary Statistics page displays statistics on packets transmitted and received on each port
or trunk. These statistics can be used to identify potential problems with the switch. The displayed val-
ues are the accumulated totals since the last clear operation.
To display the Port Summary Statistics page, click 

Switching

 > 

Port Configuration 

in the navigation

pane and select the 

Statistics

 tab.

Figure 18. Port Summary Statistics Page 

Table 12. Port Summary Statistics Fields

Click 

Clear All Counters 

to reset all statistics to zero.

Field

Description

Interface

The port or trunk ID.

Received Packets w/o Error

The count of packets received on the port without any packet errors.

Received Packets with Error

The count of packets received on the port with errors.

Broadcast Received Packets

The count of broadcast packets received on the port.

Transmitted Packets w/o Error

The number of packets transmitted out of that port without any packet errors.

Transmitted Packets with Error

The number of packets transmitted out of the port with packet errors.

Collisions

The number of packet collisions.

Transmitted Pause Frames 

The number of Ethernet pause frames transmitted. (This information is collected for ports 

but not for trunks.)

Received Pause Frames

The number of Ethernet pause frames received. (This information is collected for ports 

but not for trunks.)

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

Kathrein EXE 159 Manual preview
EXE 159
Brand: Kathrein Pages: 41
Lindy 32351 Manual preview
32351
Brand: Lindy Pages: 70
K-Dyne OMP L80-P Manual preview
OMP L80-P
Brand: K-Dyne Pages: 10
Inline MSV0502 Operation Manual preview
MSV0502
Brand: Inline Pages: 26
PureLink HDS-21R Owner'S Manual preview
HDS-21R
Brand: PureLink Pages: 10
FS S3200 Series Quick Start Manual preview
S3200 Series
Brand: FS Pages: 41
HIKVISION DS-PDEB-EG2-WE Manual preview
DS-PDEB-EG2-WE
Brand: HIKVISION Pages: 5
F&F PF-421 TRMS Manual preview
PF-421 TRMS
Brand: F&F Pages: 10
DANLERS CEFLA PIR DALIP Installation Notes preview
CEFLA PIR DALIP
Brand: DANLERS Pages: 2
GE USB 2.0 7-Port Hub HO97916 Instruction Manual preview
USB 2.0 7-Port Hub HO97916
Brand: GE Pages: 19
WTI IPS-400 User Manual preview
IPS-400
Brand: WTI Pages: 56
Black Box 26592 Specifications preview
26592
Brand: Black Box Pages: 3
SmartAVI D2H-4P Quick Start Manual preview
D2H-4P
Brand: SmartAVI Pages: 2
Lindy 32320 User Manual preview
32320
Brand: Lindy Pages: 12
Kensence S-Mix-Pro 18*18 Operation Manual preview
S-Mix-Pro 18*18
Brand: Kensence Pages: 24
IBM 4002-C4A Installation And User Manual preview
4002-C4A
Brand: IBM Pages: 94
B&B Electronics ICE-104P How To Use preview
ICE-104P
Brand: B&B Electronics Pages: 2
Ortech DWOS Quick Start Manual preview
DWOS
Brand: Ortech Pages: 3

Brands by name

Popular brands

Load more brands