manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Port Access Control

173

To reset all statistics counters to 0, select each interface with the statistics to reset and click 

Clear

. 

Port Access Control Details

The following information describes the additional fields that appear in the Details window. The fields this window displays 

depend on whether the interface is configured as an authenticator or supplicant, as noted in the applicable field descriptions. 

EAPOL Start Frames 

Received 

The total number of EAPOL-Start frames received on the interface. EAPOL-Start frames are 

sent by a supplicant to initiate the 802.1X authentication process when it connects to the 

interface. This field is displayed only if the interface is configured as an authenticator. 

EAPOL Logoff Frames 

Received 

The total number of EAPOL-Logoff frames received on the interface. EAPOL-Logoff frames 

are sent by a supplicant to indicate that it is disconnecting from the network, and the 

interface can return to the unauthorized state. This field is displayed only if the interface is 

configured as an authenticator.

EAP Response/ID Frames 

Received

The total number of EAP-Response Identity frames the interface has received. EAP-

Response Identity frames are sent by a supplicant to provide user information that is used 

to for authentication. This field is displayed only if the interface is configured as an 

authenticator. 

EAP Response Frames 

Received 

The total number of EAP-Response frames the interface has received. EAP-Response 

frames are sent from a supplicant to an authentication server during the authentication 

process. This field is displayed only if the interface is configured as an authenticator. 

EAP Request/ID Frames 

Transmitted 

The total number of EAP-Request Identity frames the interface has sent. EAP-Request 

Identity frames are sent from an authenticator to a supplicant to request user information 

that is used to for authentication. This field is displayed only if the interface is configured as 

an authenticator. 

EAP Request Frames 

Transmitted 

The total number of EAP-Request frames the interface has sent. EAP-Request frames are 

sent from an authentication server to the client to request authentication information. This 

field is displayed only if the interface is configured as an authenticator. 

EAPOL Start Frames 

Transmitted

The total number of EAPOL-Start frames the interface has sent to a remote authenticator. 

EAPOL-Start frames are sent by a supplicant to initiate the 802.1X authentication process 

when it connects to the interface. This field is displayed only if the interface is configured as 

a supplicant. 

EAPOL Logoff Frames 

Transmitted

The total number of EAPOL-Logoff frames the interface has sent to a remote authenticator. 

EAPOL-Logoff frames are sent by a supplicant to indicate that it is disconnecting from the 

network, and the interface can return to the unauthorized state. This field is displayed only 

if the interface is configured as a supplicant. 

EAP Response/ID Frames 

Transmitted

The total number of EAP-Response Identity frames the interface has sent. EAP-Response 

Identity frames are sent by a supplicant to provide user information that is used to for 

authentication. This field is displayed only if the interface is configured as a supplicant. 

EAP Response Frames 

Transmitted 

The total number of EAP-Response frames the interface has transmitted. EAP-Response 

frames are sent from a supplicant to an authentication server during the authentication 

process. This field is displayed only if the interface is configured as an supplicant. 

EAP Request/ID Frames 

Received 

The total number of EAP-Request Identity frames the interface has received. EAP-Request 

Identity frames are sent from an authenticator to a supplicant to request user information 

that is used to for authentication. This field is displayed only if the interface is configured as 

a supplicant. 

EAP Request Frames 

Received

The total number of EAP-Request frames the interface has received. EAP-Request frames 

are sent from the authentication server to the supplicant during the authentication process. 

This field is displayed only if the interface is configured as a supplicant. 

Invalid EAPOL Frames 

Received

The number of unrecognized EAPOL frames received on the interface. 

EAPOL Length Error Frames 

Received

The number of EAPOL frames with an invalid packet body length received on the interface. 

Field

Description

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

KELCO E30 Installation & Programming Manual preview
E30
Brand: KELCO Pages: 41
D-Link DES-3326SRM Product Manual preview
DES-3326SRM
Brand: D-Link Pages: 242
H3C S5170-EI Series Manual preview
S5170-EI Series
Brand: H3C Pages: 46
Raritan MCCAT18 Specifications preview
MCCAT18
Brand: Raritan Pages: 4
Lindy 32351 Manual preview
32351
Brand: Lindy Pages: 70
AMX AVS-OP-1616-340 Product View preview
AVS-OP-1616-340
Brand: AMX Pages: 1
INFLUX MEASUREMENTS SPDB 30 Manual To The Installation, Operation & Maintenance preview
SPDB 30
Brand: INFLUX MEASUREMENTS Pages: 6
Avocent SwitchView SC8 DVI Specifications preview
SwitchView SC8 DVI
Brand: Avocent Pages: 2
LEGRAND HKRL20 Installation Manual preview
HKRL20
Brand: LEGRAND Pages: 30
ADS Antenna-Disconnect-Switch Assembly And Operation Manual preview
Antenna-Disconnect-Switch
Brand: ADS Pages: 12
Racal Instruments 1260-X121 User Manual preview
1260-X121
Brand: Racal Instruments Pages: 33
Black Box LB9007A-SC-R Installation preview
LB9007A-SC-R
Brand: Black Box Pages: 2
NewStar NS-211KA User Manual preview
NS-211KA
Brand: NewStar Pages: 10
FIBERROAD FR-6R3204 User Manual preview
FR-6R3204
Brand: FIBERROAD Pages: 30
Leviton 47693-ESM Product Specifications preview
47693-ESM
Brand: Leviton Pages: 2
LEGRAND Valena Life LE-752107 User Manual preview
Valena Life LE-752107
Brand: LEGRAND Pages: 5
Samson 3768 Mounting And Operating Instructions preview
3768
Brand: Samson Pages: 48
Gefen GEF-UHD-89-HBT2 User Manual preview
GEF-UHD-89-HBT2
Brand: Gefen Pages: 232

Brands by name

Popular brands

Load more brands