manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 10

About This Document

Preface

About This Document

The HPE OfficeConnect 1920S Switch Series provides reliable, plug-and-play Gigabit network connec-
tivity. The HPE OfficeConnect 1920S switches are ideal for open offices that require silent operation or
businesses making the transition from unmanaged to managed networks.
The HPE OfficeConnect 1920S switches can be managed in-band from a remote network station using
a web-based graphical user interface (GUI), and its configuration may also be viewed using the SNMP
manager. This guide describes how to configure and view the software features using the web GUI.

Audience

The information in this guide is primarily intended for system administrators and support providers who
are responsible for configuring, operating, or supporting a network using HPE OfficeConnect 1920S
switch software. An understanding of the software specifications for the networking device platform,
and a basic knowledge of Ethernet and networking concepts, are presumed.

About Your Switch Manual Set

The switch manual set includes the following:

HPE OfficeConnect 1920S Switch Series Quick Setup Guide and Safety/Regulatory Infor-

mation

 - a printed guide shipped with your switch. Provides illustrations for basic installation and

setup. Also includes product specifications, as well as safety and regulatory statements and stan-

dards supported by the switch. 

HPE OfficeConnect 1920S Switch Series Installation and Getting Started Guide

 - (HPE web-

site only). Provides detailed installation guide for your switch, including physical installation on

your network, basic troubleshooting, product specifications, supported accessories, Regulatory

and Safety information.

HPE OfficeConnect 1920S Switch Series Management and Configuration Guide

 - This guide

describes how to manage and configure switch features using a web browser interface.

Release Notes

 - (HPE website only). Provides information on software updates. The Release

Notes describe new features, fixes, and enhancements that become available between revisions

of the above guides.

NOTE: 

For the latest version of all HPE documentation, visit the HPE website at 

www.hpe.com/support/manuals

. Then select your switch product.

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

D-Link DES-3326SRM Product Manual preview
DES-3326SRM
Brand: D-Link Pages: 242
H3C S5170-EI Series Manual preview
S5170-EI Series
Brand: H3C Pages: 46
UfiSpace S9180-32X Hardware Installation Manual preview
S9180-32X
Brand: UfiSpace Pages: 25
Equip Vision 332702 Manual preview
Vision 332702
Brand: Equip Pages: 10
netvox ZigBee Z815B User Manual preview
ZigBee Z815B
Brand: netvox Pages: 14
N-Tron 709FX Series User Manual & Installation Manual preview
709FX Series
Brand: N-Tron Pages: 196
ATEN Master View CS-74A User Manual preview
Master View CS-74A
Brand: ATEN Pages: 16
Versa Technology VX-GPH8245 User Manual preview
VX-GPH8245
Brand: Versa Technology Pages: 26
WilTec SKD-1 Operation Manual preview
SKD-1
Brand: WilTec Pages: 7
A-Neuvideo ANI-44VGA Instruction Manual preview
ANI-44VGA
Brand: A-Neuvideo Pages: 9
Sun Oracle Sun Datacenter InfiniBand Switch 36 Hardware Security Manual preview
Sun Datacenter InfiniBand Switch 36
Brand: Sun Oracle Pages: 12
IOGear CS1222TAA4 Manual preview
CS1222TAA4
Brand: IOGear Pages: 54
iNels RFSAI-62B Quick Start Manual preview
RFSAI-62B
Brand: iNels Pages: 7
NETGEAR GS105v5 Installation Manual preview
GS105v5
Brand: NETGEAR Pages: 2
Gembird NS-16P2 User Manual preview
NS-16P2
Brand: Gembird Pages: 10
IBM 17351LX Installation And User Manual preview
17351LX
Brand: IBM Pages: 94
Lantech LPES-2224C User Manual preview
LPES-2224C
Brand: Lantech Pages: 108
Abus FUBE50061 Installation Instructions And User Manual preview
FUBE50061
Brand: Abus Pages: 188

Brands by name

Popular brands

Load more brands