HPE OfficeConnect 1920S 24G series Management And Configuration Manual Download Page 193

Page: 193 / 209

Traceroute

193

Click

Apply

to send the traceroute to the specified host.

Port

The UDP destination port number to be used in probe packets. The port number should be a port that the

target host is not listening on, so that when the probe reaches the destination, it responds with an ICMP

Port Unreachable message.

Size

The size of probe payload in bytes.

Interface

The source interface to use when sending the traceroute, which is the network port.

Results

The results of the traceroute are displayed

Field

Description

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Search results

Summary of Contents for OfficeConnect 1920S 24G series

Reviews:

Related manuals for OfficeConnect 1920S 24G series

Brands by name

Popular brands

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

Search results

Summary of Contents for OfficeConnect 1920S 24G series

Reviews:

Related manuals for OfficeConnect 1920S 24G series

Brands by name

Popular brands