manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 168

Port Access Control

Click 

Apply

 to update the switch configuration. Your changes take effect immediately but are not

retained across a switch reset unless you click 

Save Configuration

.

Configuring Port Access Control on an Interface

To configure the port access control settings on an interface:

1.

Select the interface to configure.

2.

Click 

Edit

. 

The Edit Port Configuration page appears.

Backend State

The current state of the back-end authentication state machine, which is the 802.1X process 

that controls the interaction between the 802.1X client on the local system and the remote 

authentication server. The state can be one of the following: 

Request 

Response 

Success 

Fail 

Timeout 

Initialize 

Idle 

Initialize (Icon) 

Click the Initialize icon to reset the 802.1X state machine on the associated interface to the 

initialization state. Traffic sent to and from the port is blocked during the authentication 

process. This icon can be clicked only when the port is an authenticator and the operating 

control mode is Auto. 

Re-Authenticate (Icon)

Click the Re-Authenticate icon to force the associated interface to restart the authentication 

process.

Field

Description

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

3Com Switch 4500 Family Configuration Manual preview
Switch 4500 Family
Brand: 3Com Pages: 742
3Com Switch 7757 Configuration Manual preview
Switch 7757
Brand: 3Com Pages: 940
3Com 4210 Series Release Notes preview
4210 Series
Brand: 3Com Pages: 43
3Com OfficeConnect WX1200 Command Reference Manual preview
OfficeConnect WX1200
Brand: 3Com Pages: 646
3onedata TNS5500D Series Quick Start Manual preview
TNS5500D Series
Brand: 3onedata Pages: 5
3onedata IPS7112G-4GS-8GPOE Quick Installation Manual preview
IPS7112G-4GS-8GPOE
Brand: 3onedata Pages: 3
AVE 8PSWT Specification preview
8PSWT
Brand: AVE Pages: 2
V7 MPEGS24 User Manual preview
MPEGS24
Brand: V7 Pages: 35
TRENDnet TE100-S5 Lühike Paigaldusjuhend preview
TE100-S5
Brand: TRENDnet Pages: 11
Eaton Edison Cooper Power Series Installation And Operation Instructions Manual preview
Edison Cooper Power Series
Brand: Eaton Pages: 12
Bridgetek PANL PH44 Quick Start Manual preview
PANL PH44
Brand: Bridgetek Pages: 2
Gira 2324 Series Operating Instructions preview
2324 Series
Brand: Gira Pages: 2
Gembird UHB-C224 User Manual preview
UHB-C224
Brand: Gembird Pages: 11
B&B Electronics UHR304 Quick Start Manual preview
UHR304
Brand: B&B Electronics Pages: 2
The Siemon Company Block S66M1-50 Specifications preview
Block S66M1-50
Brand: The Siemon Company Pages: 2
DigitalZone Sound Switcher Installation Manual preview
Sound Switcher
Brand: DigitalZone Pages: 20
Planet XGS-6350-12X8TR Quick Installation Manual preview
XGS-6350-12X8TR
Brand: Planet Pages: 16
LogiLink HD0006 Specifications preview
HD0006
Brand: LogiLink Pages: 3

Brands by name

Popular brands

Load more brands