manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 114

PoE Port Schedule

Routing IP VLAN/Interface Configuration

Use the Routing IP VLAN/Interface Configuration page to configure the IP routing settings for each
interface. 
To display the page, click 

Routing

 > 

Configuration 

in the navigation pane and click the 

VLAN/Inter-

face Configuration 

tab.

Figure 80. Routing IP VLAN/Interface Configuration Page

Table 61. Routing IP VLAN/Interface Configuration Fields

Field

Description

Type

The type of interface that can be configured for routing:

Interface – Enables list of all non-loopback interfaces that can be configured for routing.

VLAN – Enables list of all VLANs that can be configured for routing.

VLAN

The menu contains all VLANs that can be configured for routing. To configure routing settings 

for a VLAN, select it from the menu and then configure the rest of the settings on the page.

Interface

The menu contains all non-loopback interfaces that can be configured for routing. To 

configure routing settings for an interface, select it from the menu and then configure the rest 

of the settings on the page. 

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

B&K HD6 User Manual preview
HD6
Brand: B&K Pages: 28
B&K HD6 Getting Started Manual preview
HD6
Brand: B&K Pages: 2
Valcom V-2972 User Manual preview
V-2972
Brand: Valcom Pages: 2
SIIG AV-GM08G3-S1 Manual preview
AV-GM08G3-S1
Brand: SIIG Pages: 17
Zamel GRL-01 Instruction Manual preview
GRL-01
Brand: Zamel Pages: 4
e+p UHD 131 Manual preview
UHD 131
Brand: e+p Pages: 2
hager WBMSLL Quick Start Manual preview
WBMSLL
Brand: hager Pages: 2
HIKVISION DS-3E0108P-E User Manual preview
DS-3E0108P-E
Brand: HIKVISION Pages: 25
DataParts DAP-SW1001 User Manual preview
DAP-SW1001
Brand: DataParts Pages: 5
Edge-Core ES4324 Installation Manual preview
ES4324
Brand: Edge-Core Pages: 60
steute Ex 13 Mounting And Wiring Instructions preview
Ex 13
Brand: steute Pages: 10
NB CT-HDVD-4X14K-SW User Manual preview
CT-HDVD-4X14K-SW
Brand: NB Pages: 23
Watt Stopper WI-200 Installation Instructions preview
WI-200
Brand: Watt Stopper Pages: 2
Steren FASTHOME 550-030 Installation Manual preview
FASTHOME 550-030
Brand: Steren Pages: 4
Campbell HUB-SDM8 Instruction Manual preview
HUB-SDM8
Brand: Campbell Pages: 10
Copal 102R Instruction Manual preview
102R
Brand: Copal Pages: 9
Lindy 42346 User Manual preview
42346
Brand: Lindy Pages: 16
Exsys EX-1190HMVS-PD Manual preview
EX-1190HMVS-PD
Brand: Exsys Pages: 14

Brands by name

Popular brands

Load more brands