manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Getting Started With the Web Interface

13

Operating System and Browser Support

The following operating systems and browsers with JavaScript enabled are supported:

Getting Started With the Web Interface

This section describes how to log on to the switch and provides information about the page layout.

Logging On

Follow these steps to log on through the web interface:

1.

Open a web browser and enter the IP address of the switch in the web browser address field. 

2.

On the Login page, enter the username and password (if one has been set), and then click 

Log In

.

By default, the username is 

admin

 and there is no password. After the initial log on, the administra-

tor may configure a password.

Figure 1.

Login Page

Operating System

Browser

Windows 7

Internet Explorer 9, 10
Firefox 38.2.1, 40.0.3, 41.0.b1 (beta)
Chrome 44.0.2403, 45.0.2454, 46.0 (beta)

Windows 8/8.1

Internet Explorer 11 (included in base OS 8.1)
Firefox 38.2.1, 40.0.3, 41.0.b1 (beta)
Chrome 44.0.2403, 45.0.2454, 46.0 (beta)

Windows 10

Internet Explorer 11 (included in base OS)
Chrome 44.0.2403, 45.0.2454 (beta)

MacOS X

Firefox 38.2.1, 40.0.3, 41.0.b1 (beta)

MacOS X 10.6 and later

Safari 7, Chrome 44.0.2403, 45.0.2454, 46.0 (beta)

NOTE:

To set the password or change the username, see 

“Password Manager” on page 34

. 

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

Dataprobe iBoot PoE-P General Description Manual preview
iBoot PoE-P
Brand: Dataprobe Pages: 31
IBM ThinkPad 600 Product Overview preview
ThinkPad 600
Brand: IBM Pages: 13
IBM Flex System EN2092 Quick Start Manual preview
Flex System EN2092
Brand: IBM Pages: 2
i3 International S244 Quick Start Manual preview
S244
Brand: i3 International Pages: 2
Yeastar Technology MyPBX Manual preview
MyPBX
Brand: Yeastar Technology Pages: 11
Top View KVM-102U User Manual preview
KVM-102U
Brand: Top View Pages: 2
Clas Ohlson 36-2824 Quick Start Manual preview
36-2824
Brand: Clas Ohlson Pages: 5
Technische Alternative AI5S-DL Operator'S And Programming Manual preview
AI5S-DL
Brand: Technische Alternative Pages: 4
Cabletron Systems 6H122-08 User Manual preview
6H122-08
Brand: Cabletron Systems Pages: 170
Radial Engineering Cherry Picker User Manual preview
Cherry Picker
Brand: Radial Engineering Pages: 8
HDTV Supply HDTVCV0702HDS User Manual preview
HDTVCV0702HDS
Brand: HDTV Supply Pages: 15
S&S Northern Merlin CS1 User Manual preview
Merlin CS1
Brand: S&S Northern Pages: 8
KBT TPR22-BM Series Installation And Operating Manual preview
TPR22-BM Series
Brand: KBT Pages: 4
Barksdale 9671 Series Operating Instructions Manual preview
9671 Series
Brand: Barksdale Pages: 6
Transition Networks SM24-1000SFP-AH Installation Manual preview
SM24-1000SFP-AH
Brand: Transition Networks Pages: 76
AV Link 128.823UK User Manual preview
128.823UK
Brand: AV Link Pages: 2
AMX AVS-OP-2416-340 Specifications preview
AVS-OP-2416-340
Brand: AMX Pages: 1
Guardmaster PROSAFE RKSE Series Manual preview
PROSAFE RKSE Series
Brand: Guardmaster Pages: 4

Brands by name

Popular brands

Load more brands