manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 174

Port Access Control

Port Access Control Client Summary

This page displays information about supplicant devices that are connected to the local authenticator
ports. If there are no active 802.1X sessions, the table is empty. To view additional information about a
supplicant, select the interface it is connected to and click 

Details

. 

To access the Port Access Control Client Summary page, click 

Security

 > 

Port Access Control 

in the

navigation pane, and then click the 

Client Summary

 tab.

Figure 125. Port Access Control Client Summary Page

Table 94. Port Access Control Client Summary Fields

Field

Description

Interface 

The local interface associated with the rest of the data in the row. When viewing detailed 

information for an interface, this field identifies the interface being viewed. 

Logical Interface 

The logical port number associated with the supplicant that is connected to the port.

User Name

The name the client uses to identify itself as a supplicant to the authentication server. 

Supp MAC Address

The MAC address of the supplicant that is connected to the port.

Session Time

The amount of time that has passed since the connected supplicant was granted access to 

the network through the authenticator port.

Filter ID

The policy filter ID assigned by the authenticator to the supplicant device. 

VLAN ID

The ID of the VLAN the supplicant was placed in as a result of the authentication process. 

Port Access Control Client Details

The following information describes the additional fields that appear in the Port Access Control Client Details window. 

Session Timeout 

The reauthentication timeout period set by the RADIUS server to the supplicant device.

Session Termination 

Action 

The termination action set by the RADIUS server that indicates the action that will take place 

once the supplicant reaches the session timeout value. 

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

Fema DCM Series Assembly And Operating Instructions Manual preview
DCM Series
Brand: Fema Pages: 96
IBM 8265 Site Preparation Manual preview
8265
Brand: IBM Pages: 164
IBM 8265 Nways ATM Switch Problem Determination And Service Manual preview
8265 Nways ATM Switch
Brand: IBM Pages: 174
KELCO F21 Series Installing And Operating Information preview
F21 Series
Brand: KELCO Pages: 4
Kramer VS-88DVI User Manual preview
VS-88DVI
Brand: Kramer Pages: 28
Murphy Temperature SWICHGAGE SPL Owner'S Manual preview
Temperature SWICHGAGE SPL
Brand: Murphy Pages: 4
Delta Electronics SK1027 Specifications preview
SK1027
Brand: Delta Electronics Pages: 1
Extron electronics MSW 4SV rs Specifications preview
MSW 4SV rs
Brand: Extron electronics Pages: 2
Westell A99-BAI-ACSF-UGKIT Install Instructions preview
A99-BAI-ACSF-UGKIT
Brand: Westell Pages: 3
socomec 95333400 Instruction Manual preview
95333400
Brand: socomec Pages: 43
Linksys ProConnect PS2KVM2 User Manual preview
ProConnect PS2KVM2
Brand: Linksys Pages: 17
B&B Electronics EIR405-SFP-T User Manual preview
EIR405-SFP-T
Brand: B&B Electronics Pages: 22
Lantech IPES-5222T Series User Manual preview
IPES-5222T Series
Brand: Lantech Pages: 30
hager HIC4 Series Operating Instructions Manual preview
HIC4 Series
Brand: hager Pages: 72
Velleman VMS8 Quick Start Manual preview
VMS8
Brand: Velleman Pages: 4
SOMFY COMMANDE MURALE RTS Manual preview
COMMANDE MURALE RTS
Brand: SOMFY Pages: 2
Exsys EX-1195HMS Manual preview
EX-1195HMS
Brand: Exsys Pages: 14
Intellinet 560641 Instructions Manual preview
560641
Brand: Intellinet Pages: 12

Brands by name

Popular brands

Load more brands