manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 160

RADIUS Settings

To view additional information about a RADIUS server, select the server with the information to view
and click 

Details

. The following table describes the additional RADIUS server information that the

RADIUS Server Detailed Statistics page shows.

Table 87. Detailed RADIUS Server Statistics Fields

Click 

Clear

 to clear all RADIUS authentication and accounting server statistics. After you confirm the

action, the statistics page will get reset. Click 

Refresh

 to update the page with the most current infor-

mation.

Timeouts

The number of times a response was not received from the server within the configured 

timeout value. 

Packets Dropped

The number of RADIUS packets received from the server on the authentication port and 

dropped for some other reason. 

Field

Description

Access Retransmissions

The number of RADIUS Access-Request packets that had to be retransmitted to the server 

because the initial Access-Request packet failed to be successfully delivered. 

Access Accepts

The number of RADIUS Access-Accept packets, including both valid and invalid packets, that 

were received from the server. 

Access Challenges

The number of RADIUS Access-Challenge packets, including both valid and invalid packets, 

that were received from the server. 

Malformed Access 

Responses

The number of malformed RADIUS Access-Response packets received from the server. 

Malformed packets include packets with an invalid length. Bad authenticators, signature 

attributes, and unknown types are not included as malformed access responses. 

Bad Authenticators

The number of RADIUS Access-Response packets containing invalid authenticators or 

signature attributes received from the server. 

Unknown Types

The number of RADIUS packets of unknown type which were received from the server on the 

authentication port. 

Field

Description

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

Tecsis MagSwitch Operating Manual preview
MagSwitch
Brand: Tecsis Pages: 2
Lantech IGS-2206C User Manual preview
IGS-2206C
Brand: Lantech Pages: 118
Global Streams GlobeCaster STUDIO 4000 Manual preview
GlobeCaster STUDIO 4000
Brand: Global Streams Pages: 144
MRD TNM4000-TP36FF4X16G24P User Manual preview
TNM4000-TP36FF4X16G24P
Brand: MRD Pages: 38
Banner PICO-GUARD SFI-D1EDPXT6 Instruction Manual preview
PICO-GUARD SFI-D1EDPXT6
Brand: Banner Pages: 2
Hama 42556 Operating Instructions Manual preview
42556
Brand: Hama Pages: 36
Extreme Networks Summit X450-G2-24t-GE4 Installation Manual preview
Summit X450-G2-24t-GE4
Brand: Extreme Networks Pages: 2
Omron DZ Datasheet preview
DZ
Brand: Omron Pages: 6
IOGear GUD3C8K2P Quick Start Manual preview
GUD3C8K2P
Brand: IOGear Pages: 10
Pakedge Device & Software SE-8P4 User Manual preview
SE-8P4
Brand: Pakedge Device & Software Pages: 8
Larson Electronics EPS-1XPB-1XPL-M1-24V Instruction Manual preview
EPS-1XPB-1XPL-M1-24V
Brand: Larson Electronics Pages: 2
Gigabyte SW008A Reference Manual preview
SW008A
Brand: Gigabyte Pages: 2
Mini Gadgets HCWS1 User Manual preview
HCWS1
Brand: Mini Gadgets Pages: 4
C&H Technologies VX414C Specification Sheet preview
VX414C
Brand: C&H Technologies Pages: 1
Rose electronics Station Master Installation And Operation Manual preview
Station Master
Brand: Rose electronics Pages: 19
Kraun KR.G2 Quick Manual preview
KR.G2
Brand: Kraun Pages: 8
Kramer VS-2616 User Manual preview
VS-2616
Brand: Kramer Pages: 7
Philips SWV2052W/10 Instruction Sheet preview
SWV2052W/10
Brand: Philips Pages: 2

Brands by name

Popular brands

Load more brands