manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 156

RADIUS Settings

RADIUS Settings

Remote Authorization Dial-In User Service (RADIUS) servers provide additional security for networks.
The HPE OfficeConnect 1920S switch includes a RADIUS client that can contact one or more RADIUS
servers for various Authentication and Accounting (AAA) services. The RADIUS server maintains a
centralized database that contains per-user information. 

RADIUS Configuration

Use the RADIUS Configuration page to configure global settings for the Remote Authentication Dial-In
User Service (RADIUS) feature and to configure one or more RADIUS servers for the switch to con-
tact. 
To display the RADIUS Configuration page, click 

Security

 > 

RADIUS 

in the navigation pane, and

ensure that the 

Configuration

 tab is selected.

Figure 114. RADIUS Configuration Page

Table 85. RADIUS Configuration Fields

Field

Description

Global RADIUS Settings

802.1X Authentication 

Mode

Specifies whether the IEEE 802.1X authentication mode on the switch is enabled or disabled. 
When this setting is selected, and port-based authentication is enabled for the device, 

RADIUS will be used for the 802.1x authentication process. Specifically, the credentials 

presented by the authenticating station (the 802.1x supplicant) are sent to the configured 

RADIUS server(s) for verification.

802.1X Accounting Mode

Specifies whether the IEEE 802.1X accounting mode on the switch is enabled or disabled. 
When this setting is selected, RADIUS is used for session accounting. Specifically, an 

accounting event is sent to the configured RADIUS server(s) at the start and end of each 

802.1x session.

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

GE SE-100E Instructions Manual preview
SE-100E
Brand: GE Pages: 20
Hama S2100 Operating Instruction preview
S2100
Brand: Hama Pages: 18
Perel EMS113 User Manual preview
EMS113
Brand: Perel Pages: 4
A-Neuvideo HD-88CT-A Instruction Manual preview
HD-88CT-A
Brand: A-Neuvideo Pages: 26
Nobile 9109011003 Mounting And Operation Instructions preview
9109011003
Brand: Nobile Pages: 2
A-Neuvideo ANI-3AUTOHDMI Instruction Manual preview
ANI-3AUTOHDMI
Brand: A-Neuvideo Pages: 16
Black Box SW045A-FFF Manual preview
SW045A-FFF
Brand: Black Box Pages: 9
Extron electronics 60-1021-01 User Manual preview
60-1021-01
Brand: Extron electronics Pages: 137
Steren SHOME-140 User Manual preview
SHOME-140
Brand: Steren Pages: 13
KYLAND Technology SICOM3028GP Series Hardware Installation Manual preview
SICOM3028GP Series
Brand: KYLAND Technology Pages: 40
ALFAtron ALF- WUK3A Manual preview
ALF- WUK3A
Brand: ALFAtron Pages: 15
Raritan SwitchMan USB-Combo SW4 Quick Installation And Setup Manual preview
SwitchMan USB-Combo SW4
Brand: Raritan Pages: 2
3onedata IES6300PRO Series Quick Installation Manual preview
IES6300PRO Series
Brand: 3onedata Pages: 5
Lex PowerGATE LELTS-1 Series Installation Instructions & User Manual preview
PowerGATE LELTS-1 Series
Brand: Lex Pages: 12
Primewire 302523/20191008SZ114 User Manual preview
302523/20191008SZ114
Brand: Primewire Pages: 12
WaveSplitter WST-PIP001 Operation Manual preview
WST-PIP001
Brand: WaveSplitter Pages: 35
Edimax RAS106 User Manual preview
RAS106
Brand: Edimax Pages: 23
Harman AMX DVX-2265-4K Quick Start Manual preview
AMX DVX-2265-4K
Brand: Harman Pages: 2

Brands by name

Popular brands

Load more brands