PoE Port Schedule
113
Click
Apply
to update the switch configuration. Your changes take effect immediately but are not
retained across a switch reset unless you click
Save Configuration
.
Static Route Preference
The default distance (preference) for static routes. Lower route-distance values are preferred
when determining the best route. Changing the Static Route Preference does not update
the preference of existing static routes.
Local Route Preference
The default distance (preference) for local routes.
Maximum Next Hops
The maximum number of hops supported by the switch. This is a read-only value.
Maximum Routes
The maximum number of routes (routing table size) supported by the switch.
Global Default Gateway
The IP address of the default gateway for the device. If the destination IP address in a packet
does not match any routes in the routing table, the packet is sent to the default gateway. The
gateway specified in this field is more preferred than a default gateway learned from a DHCP
server. Use the icons associated with this field to perform the following tasks:
To configure the default gateway, click the Edit icon and specify the IP address of the
default gateway in the available field.
To reset the IP address of the default gateway to the factory default value, click the
Reset icon associated with this field.
Field
Description
