manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 82

VLAN Port Configuration

VLAN Port Configuration

Use the VLAN Port Configuration page to configure the way interfaces handle VLAN-tagged, priority-
tagged, and untagged traffic. To view this page, click 

VLANs

 > 

VLAN Port Configuration

 in the navi-

gation pane.

Figure 55. VLAN Port Configuration Page

Table 36. VLAN Port Configuration Fields

To modify these settings for one or more interfaces, select the interface and click 

Edit

. Or, click 

Edit

All

 to configure all interfaces at the same time. Click 

Apply

 to save any changes for the currently

selected VLAN. The changes take effect immediately but are not retained across a switch reset unless
you click 

Save Configuration

.

Field

Description

Interface

Identifies the physical interface associated with the rest of the data in the row.

Port VLAN ID

The VLAN ID assigned to untagged or priority tagged frames received on this port. This value 

is also known as the Port VLAN ID (PVID). In a tagged frame, the VLAN is identified by the 

VLAN ID in the tag. 

Acceptable Frame Types

Indicates how the interface handles untagged and priority tagged frames: 

Admit All – Untagged and priority tagged frames received on the interface are accepted

and assigned the value of the Port VLAN ID for this interface. 

Only Tagged – The interface discards any untagged or priority tagged frames it receives. 

Only Untagged – The interface discards any tagged frames it receives. 

For all options, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q 

VLAN standard. 

Ingress Filtering

Shows how the port handles tagged frames. 

Enable: A tagged frame is discarded if this port is not a member of the VLAN identified

by the VLAN ID in the tag.

Disable: All tagged frames are accepted, which is the factory default.

Untagged VLANs

VLANs that are configured on the port to transmit egress packets as untagged.

Tagged VLANs

VLANs that are configured on the port to transmit egress packets as tagged.

 Priority

Identifies the default 802.1p priority assigned to untagged packets arriving at the port.

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

D-Link DGS-3224TGR - Switch User Manual preview
DGS-3224TGR - Switch
Brand: D-Link Pages: 160
D-Link DGS-3024 User Manual preview
DGS-3024
Brand: D-Link Pages: 145
D-Link DGS-1510 Series Getting Started Manual preview
DGS-1510 Series
Brand: D-Link Pages: 64
D-Link DES-3528 - xStack Switch - Stackable Reference Manual preview
DES-3528 - xStack Switch - Stackable
Brand: D-Link Pages: 367
Dataprobe iBoot-G2 Instructions Manual preview
iBoot-G2
Brand: Dataprobe Pages: 21
Hama 00047693 Operating Instructions preview
00047693
Brand: Hama Pages: 2
I/O Interconnect SV142P1 User Manual preview
SV142P1
Brand: I/O Interconnect Pages: 27
NTI SE-15V-16-L Installation And Operation Manual preview
SE-15V-16-L
Brand: NTI Pages: 15
Maiwe MIEN2208-F User Manual preview
MIEN2208-F
Brand: Maiwe Pages: 5
Jlso Tec Trade VH M 1 1 1 Series Operating Manual preview
VH M 1 1 1 Series
Brand: Jlso Tec Trade Pages: 15
H3C LSW1GP16P0 User Manual preview
LSW1GP16P0
Brand: H3C Pages: 26
Jerguson JB**D Series Installation, Operation & Maintenance Manual preview
JB**D Series
Brand: Jerguson Pages: 16
Endress+Hauser Liquipoint FTW33 Operating Instructions Manual preview
Liquipoint FTW33
Brand: Endress+Hauser Pages: 48
HDTV Supply HDTVCV0702HDS User Manual preview
HDTVCV0702HDS
Brand: HDTV Supply Pages: 15
H3C S6826 Series Installation Manual preview
S6826 Series
Brand: H3C Pages: 57
Avid Technology MEDIAswitch Manual preview
MEDIAswitch
Brand: Avid Technology Pages: 34
Alpha Cordex HP CXRF 48-2.4kW Manual preview
Cordex HP CXRF 48-2.4kW
Brand: Alpha Pages: 56
HighSecLabs K304 Quick Start Manual preview
K304
Brand: HighSecLabs Pages: 2

Brands by name

Popular brands

Load more brands