manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 194

Reboot Switch

Reboot Switch

Use this feature to perform a software reboot of the switch. If you applied configuration changes, click
the 

Save Configuration

 button in the upper right of any page before rebooting. If the switch is config-

ured to use DHCP to acquire its IP address, the address may change upon restart; you will need to
determine the address before logging back in to the management utility.
To display the Reboot Switch page, click 

Diagnostics

 > 

Reboot Switch

.

Figure 139. Reboot Switch Page

Click 

Reboot 

to reboot the switch.

If the device configuration has changed but has not been saved, the following window appears after
you click Reboot. This window provides the opportunity to save the current configuration before reboot-
ing the switch.

Figure 140. Save Before Reboot

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

D-Link DES-1005E Quick Install Manual preview
DES-1005E
Brand: D-Link Pages: 2
Cabletron Systems SMALL OFFICE CyberSwitch 150 Manual preview
SMALL OFFICE CyberSwitch 150
Brand: Cabletron Systems Pages: 106
Edge-Core AS7726-32X Quick Start Manual preview
AS7726-32X
Brand: Edge-Core Pages: 9
Linksys ProConnect PS2KVM2 User Manual preview
ProConnect PS2KVM2
Brand: Linksys Pages: 17
Silent Gliss 0913 Installation, Programming And Operation Instructions preview
0913
Brand: Silent Gliss Pages: 4
H3C LS-5500-28C-PWR-SI-OVS Installation Manual preview
LS-5500-28C-PWR-SI-OVS
Brand: H3C Pages: 86
Lindy 32 277 Installation And Use Manual preview
32 277
Brand: Lindy Pages: 38
TAXON TOOLS Scart Switch Manual preview
Scart Switch
Brand: TAXON TOOLS Pages: 9
Fairchild FPS FSDH0265RN Manual preview
FPS FSDH0265RN
Brand: Fairchild Pages: 20
Guntermann & Drunck UCON/s Getting Started preview
UCON/s
Brand: Guntermann & Drunck Pages: 8
HighSecLabs K304 Quick Start Manual preview
K304
Brand: HighSecLabs Pages: 2
TLS Electronics 875300 User Manual preview
875300
Brand: TLS Electronics Pages: 12
TP-Link P1201-08 User Manual preview
P1201-08
Brand: TP-Link Pages: 34
Vanco Evolution EVMX4442 Manual preview
Evolution EVMX4442
Brand: Vanco Pages: 12
LEGRAND Wattstopper EOSW Series Manual preview
Wattstopper EOSW Series
Brand: LEGRAND Pages: 12
Black Box 26611 Datasheet preview
26611
Brand: Black Box Pages: 2
Gefen EXT-DPKVM-441 User Manual preview
EXT-DPKVM-441
Brand: Gefen Pages: 48
Audio Authority Ascentic MH10-ARC User Manual preview
Ascentic MH10-ARC
Brand: Audio Authority Pages: 5

Brands by name

Popular brands

Load more brands