HPE OfficeConnect 1920S 24G series Management And Configuration Manual Download Page 100

Page: 100 / 209

Page 100

LLDP-MED Remote Device Summary

Displaying Remote Device Details

To view additional information about a remote device, select the interface that received the LLDP-MED
data and click

Details

Figure 70.

LLDP-MED Remote Device Information Page

The following additional fields appear on the

LLDP-MED Remote Device Information

page:

Field

Description

Capability Information

Supported Capabilities

The supported capabilities that were received in the MED TLV on this interface.

Enabled Capabilities

The supported capabilities on the remote device that are also enabled.

Device Class

The MED Classification advertised by the TLV from the remote device.

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Search results

Summary of Contents for OfficeConnect 1920S 24G series

Reviews:

Related manuals for OfficeConnect 1920S 24G series

Brands by name

Popular brands

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

Search results

Summary of Contents for OfficeConnect 1920S 24G series

Reviews:

Related manuals for OfficeConnect 1920S 24G series

Brands by name

Popular brands