manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 94

LLDP Global Statistics

LLDP Global Statistics

The Link Layer Discovery Protocol (LLDP) Statistics page displays summary and per-port information
for LLDP and LLDP-MED frames transmitted and received on the switch. 
To display the LLDP Global Statistics page, click 

LLDP

 > 

Statistics

 in the navigation pane.

Figure 65. LLDP Statistics Page

Table 46. LLDP Global Statistics Fields 

Capabilities Supported

The capabilities on the remote device. The possible capabilities include other, repeater, 

bridge, WLAN AP, router, telephone, DOCSIS cable device, and station.

Capabilities Enabled

The capabilities on the remote device that are enabled. 

System ID

The reported management IP or MAC addresses of the remote device.

Field

Description

Global Statistics

Insertions

The number of times the complete set of information advertised by a particular MAC Service 

Access Point (MSAP) has been inserted into tables associated with the remote systems.

Deletions

The number of times the complete set of information advertised by a particular MSAP has 

been deleted from tables associated with the remote systems.

Drops

The number of times the complete set of information advertised by a particular MSAP could 

not be entered into tables associated with the remote systems because of insufficient 

resources.

Field

Description

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

Fema DCM Series Assembly And Operating Instructions Manual preview
DCM Series
Brand: Fema Pages: 96
H3C S9820-64H Installation Manual preview
S9820-64H
Brand: H3C Pages: 55
H3C S7508E-X Installation Manual preview
S7508E-X
Brand: H3C Pages: 111
H3C S7500X Series Interface Configuration Manual preview
S7500X Series
Brand: H3C Pages: 34
H3C S6890 Series Configuration Examples preview
S6890 Series
Brand: H3C Pages: 47
H3C S6800 Series Configuration Examples preview
S6800 Series
Brand: H3C Pages: 8
H3C S5830 Series Troubleshooting Manual preview
S5830 Series
Brand: H3C Pages: 47
H3C S5810 Series Quick Start preview
S5810 Series
Brand: H3C Pages: 4
H3C S5560X-EI Series Configuration Manual preview
S5560X-EI Series
Brand: H3C Pages: 63
H3C S5560X-EI Series Installation Manual preview
S5560X-EI Series
Brand: H3C Pages: 89
H3C S3100V2 Series Installation, Quick Start preview
S3100V2 Series
Brand: H3C Pages: 3
H3C S12500G-AF Series Troubleshooting Manual preview
S12500G-AF Series
Brand: H3C Pages: 86
H3C S12500-X Installation Manual preview
S12500-X
Brand: H3C Pages: 168
H3C S6800 Series Installation Manual preview
S6800 Series
Brand: H3C Pages: 56
H3C S12500 Series Quick Installation Manual preview
S12500 Series
Brand: H3C Pages: 19
H3C S9820-64H Installation, Quick Start preview
S9820-64H
Brand: H3C Pages: 4
H3C S12500-X Command Reference Manual preview
S12500-X
Brand: H3C Pages: 36
S&C Omni-Rupter Installation Manual preview
Omni-Rupter
Brand: S&C Pages: 28

Brands by name

Popular brands

Load more brands