SNMP
73
Adding an SNMP Access Control Group
To add a SNMP access control group click
Add
. The
Add new Access Control Group
screen
appears.
Figure 46. Add New Access Control Group Page
Configure the required fields and click
Apply
Removing an SNMP Access Control Group
To remove an SNMP v1/v2 trap receiver, select each item to delete and click
Remove
. You must con-
firm the action before the entries are removed from the page.
SNMP Version
The SNMP version associated with the group.
Security Level
The security level associated with the group, which is one of the following:
No Auth No Priv – No authentication and no data encryption (no security). This is the
only Security Level available for SNMPv1 and SNMPv2 groups.
Auth No Priv – Authentication, but no data encryption. With this security level, users
send SNMP messages that use an MD5 key/password for authentication, but not a DES
key/password for encryption.
Auth Priv – Authentication and data encryption. With this security level, users send an
MD5 key/password for authentication and a DES key/password for encryption.
Read
The level of read access rights for the group. The menu includes the available SNMP views.
When adding a group, select the check box to allow the field to be configured, then select the
desired view that restricts management access to viewing the contents of the agent.
Write
The level of write access rights for the group. The menu includes the available SNMP views.
When adding a group, select the check box to allow the field to be configured, then select the
desired view that permits management read-write access to the contents of the agent but not
to the community.
Notify
The level of notify access rights for the group. The menu includes the available SNMP views.
When adding a group, select the check box to allow the field to be configured, then select the
desired view that permits sending SNMP traps or informs.
Field
Description
