HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 118 / 340

VT Series Emulations
102 Setup Options
Keyboard sends position codes
Factory default: Unchecked
This applies to the DEC VT520 and VT PC-Term emulations. It
determines whether keyboard position codes or ASCII codes are
sent to the host on key press/release. Note that this cannot be
selected at the same time as the
Keyboard sends scan codes
option.
Auto resize
Factory default: Unchecked
This applies to the DEC VT520 emulation only. When this option is
checked, the window size will automatically be adjusted each time
the buffer size is changed either by the host or through setup. The
following table indicates the window size (lines per screen) that is
used for the specified number of lines per page.
Lines per Page: 24 25 36 42 43 48 52 72
Lines per Screen: 26 26 43 43 43 52 52 52
Dec key mode
Factory default: Unchecked
The keyboard can be used in one of two modes, Normal (default) or
DEC. This option allows you to change its default mode. You can
toggle between the two modes by pressing the keys
Alt + Num
Lock together. The 10th item on the status bar will display DEC
when the keyboard is in DEC mode. The field will be blank when in
normal mode.
Send key state codes
Factory default: Unchecked
When this option is checked, escape sequences for modifier key
presses will be sent to the host.