HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 287 / 340

271
HP TeemTalk Terminal Emulator 7.0 User Manual
CHAPTER 20
Capturing Host
Communication
This chapter describes how to capture the communication between
the host and the emulator in a file, then replay it.
Introduction
TeemTalk provides a facility for capturing the communication
between the host and the emulation to a file which you can replay.
This is achieved using the
Capture File
and
Replay File
options on
the
Tools
menu.
The default capture state is to capture received host data only, but
you can capture both received data and data sent back to the host by
the emulation by using the following command line options:
-debug Capture data sent by host only.
-debug2way Capture data sent by both host and emulation.
The default replay state is to the emulation, but you can direct the
replay to the host only or to both host and emulation by using the
following command line options:
-replay Replay directed to emulation only.
-replayhost Replay directed to host only.
-replayboth Replay directed to both host and emulation.
Note that you can modify the speed at which the replay is
performed by appending a number in the range
0 to 10 to the
command line option, where 0 is fast and 10 is slow. For example:
-replayhost8 .