HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 254 / 340

TA6530 Emulation
238 The Rule Cursor
The status line will display
BLOCK
when you are in Block mode, and
PROT
when in Block Protect mode.
ANSI Mode
In ANSI mode, characters are sent to the host as you type them, and
standard ANSI (American National Standard Institute) functions are
executed. Applications that run on the LXN host system generally
recognize and use these functions.
The status line will display
ANSI
when you are in ANSI mode.
The Rule Cursor
A cross-hair rule cursor can be displayed by pressing the keys Alt +
Page Up . To return to the normal cursor, press Alt + Page Down .
Keyboard Mapping
The keyboard is mapped as close as possible to the terminal being
emulated. The mapping of key functions can be determined by refer-
ring to the
Emulation Keys
list box in the
Key Macro Settings
dialog,
which is displayed by selecting
Key Macros...
on the
Tools
menu.
The information in brackets in the right column indicates the default
mapping of the key function named in the left column. In the list,
S+
indicates the Shift key, C+ indicates the Control key and A+ indi-
cates the Alt key. For example:
TA_LINEINS (C+VK_INSERT)
indicates that the Insert Line function is mapped to the key combi-
nation Control + Insert .
Special key functions usually found on a TA6530 keyboard can be
mapped to any key on your keyboard using the
TA virtual key
names listed in the
Key Macro Settings
dialog.
The illustrations on the following pages show where TA6530 key-
board functions are mapped to keys on a 101/102 key keyboard.