HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 259 / 340

TA6530 Emulation
Setup Options 243
Note: Changing the current setting will not take effect until you re-
start TeemTalk, so you will need to save the new setting before
exiting TeemTalk.
Conv
ersational and
Block
modes are normally used for applications
running on a NonStop host system, and
ANSI
mode for applications
running on an LXN host system. Save the new setting before exiting
the emulation by selecting
Save session
in the
File
menu.
Font
Factory default: Courier New
This enables you to specify the font to use for displaying characters.
The available settings depend on the fonts installed on your system.
Character set
Factory default: Iso Latin-1
This specifies the character set used for displaying characters.
Multinational mode
Factory default: Unchecked
This option will only be available if the system is configured for a
language that supports national replacement character sets. It deter-
mines the type of character set used to generate characters. When
unchecked, TeemTalk is in National mode in which a character set
specific to the selected keyboard nationality is used. When checked
TeemTalk is in Multinational mode in which a character set consist-
ing of two tables of characters is used. This enables characters from
any keyboard nationality to be generated.
Return function
Factory default: Unchecked
This option specifies whether or not the function of the Enter key is
defined by the application when in Block mode. When checked, the
key is regarded as an application specific function key. Normally
this should be unchecked.