HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 267 / 340

Wyse Emulations
Creating a Wyse Emulation Session 251
8
If you want a shortcut icon for this session to be created on the
desktop, check the box labelled
Create icon on desktop for
session
.
9
Click
OK
to create the session and exit.
10
To run the session, either double-click on the desktop icon if one
was created for the session, or run TeemTalk, display the
File
menu and select
Open Session
. Select the name of the required
.tts session file then click
Open
.
Using the TeemTalk
Emulator Window
This section describes the procedure for creating a Wyse emulation
session from the TeemTalk emulator window.
1
Display the
Session
menu from the menu bar and select
Transport...
to set the transport method.
2
Display the
Session
menu and select
Connection...
to set the
connection method.
3
Display the
Session
menu and select
Emulation...
. Set the
emulation to
Wyse
.
4
You can configure the transport, connection and emulation set-
tings by selecting the relevant
Configure
options in the
Session
menu. The
Emulation mode
is specified in the
Wyse Settings
dialog as described in the section “Setup Options” on page 256.
5
To save the session, display the
File
menu and select
Save ses-
sion as
. In the
File Name
field, enter a unique name that will
identify this session configuration for future selection, then click
Save
. Note that session files have the filename extension .tts .
6
To run the session, display the
File
menu and select
Open Ses-
sion
. Select the name of the required .tts session file then click
Open
.