HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 168 / 340

IBM 3151 Emulation
152 Setup Options
Forcing insert
Factory default: Both
This option specifies how an insert command affects displayed data
when the screen is full.
When set to
Off
, you will not be able to perform an insert operation.
When set to
Line
, you will be able to insert one or more lines, using
the
Ins Ln
key for example. The contents of the current and all fol-
lowing lines will move down the number of lines inserted, causing
the lines originally at the bottom of the display to be discarded.
When set to
Character
, you will be able to insert one or more
characters in the current line. Characters to the right of the cursor
position will move along. If the
Auto Wrap
option is set to
No
, then
characters originally at the end of the current line will be discarded.
If set to
Yes
, characters on all following lines will move along,
forcing characters at the end of the last line to be discarded.
When set to
Both
, the function of the
Line
and
Character
settings
will be enabled.
Insert character
Factory default: Space
The setting of this option determines the effect of pressing the
Insert
key.
When set to
Space
, a space character will be inserted after the
current cursor position.
When set to
Mode
, the emulation will enter Insert mode when the
Insert
key is pressed.
Tab operation
Factory default: Field
The setting of this option determines whether tab stops are according
to field attribute characters or column-tab definitions.