HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 189 / 340

IBM 3270 Display Emulation
Setup Options 173
case. For example, %.3s will return the first three characters of the
local host name, and %-.3s will return the last three characters.
To automatically assign a new device name for each successive con-
nection, either enter
%dN% after the name, where N is a decimal
value, or %xN% , where N is a hexadecimal value. Each time the
host requests the device name a counter will be substituted into the
device name. If the host rejects the device name as in use the counter
will be incremented modulus
N and the name retried until all possi-
bilities have been tried, at which point the emulation will report a
device name rejected error.
For example, TEST%d4% will give TEST1 on all connections
until the host rejects the name as in use, in which case TEST2 will
be used. If this is already in use then TEST3 is used, or if already in
use then TEST0 . These values are preserved over power off, so the
first connection of any given power on may not be TEST1 . Assume
that the start point is random.
When you achieve a TN3270E connection, the LU device name that
you are connected as will be displayed on the status line. If the spec-
ified device is rejected by the server or host, then an error message
box will be displayed indicating the reason.
Bind
Factory default: Unchecked
When this option is checked the server is allowed to send the SNA
Bind image and Unbind notification to the emulator.
Responses
Factory default: Unchecked
Check this option to support positive and negative response
handling. This allows the server to reflect to the emulator any and all
definite, exception, and no response requests sent by the host
application.