HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 51 / 340

Host Connection
Auto Logon 35
sensitive, so make sure your
Text
entries follow the correct con-
ventions for your system.
Note: When running the IBM 3270 or IBM 5250 emulation,
Text
entries are only applicable in NVT mode.
3
Enter the response required in the
Respond With
box. In order
for a text entry to be sent to the host it must be followed by a
carriage return command. This is specified by selecting
C.
Return
in the list of predefined commands in the list box below
then clicking the
Insert
button. A <CR> will appear in the
Respond With
box.
You can also enter a predefined key function in the
Respond
With
box by selecting
Key Definition
in the list of predefined
commands in the list box below, selecting one of the virtual key
names listed in the box below that, then clicking the
Insert
button.
The list of predefined commands that can be inserted include
UserName
(indicated by <UN> ) and
Password
(indicated by
<PW> ). Selecting either of these will cause a dialog box to pop-
up when logging on to the host prompting the user to enter a
name or password, respectively. You can also delay the script
response by 2 seconds by inserting
Delay (2s) (indicated by
<D> ) or 0.255 seconds by inserting Pause (0.255) (indicated by
<P> ).
4
When you have finished specifying the response to a particular
prompt, click the
Add
button to add the definition to the
Script
window on the right.
The script will perform the actions in the order displayed in the
Script
window. To change the order of the script lines, use the
up and down arrow buttons to the right of the
Script
window.
5
Repeat this procedure for each prompt as required.