HP TeemTalk Terminal Emulator 7.0 User Manual Download Page 280

Page: 280 / 340

Wyse Emulations

264

Setup Options

Preferences

DEL = DestBS

Factory default: Unchecked

This option applies to the WY-50+ and WY-60 emulations and
determines what effect an ASCII

DEL

character has on displayed

characters. The other emulations ignore the

DEL

character.

When unchecked, the

DEL

character is ignored. When checked, the

DEL

character is interpreted as a destructive backspace, causing the

character to the left of the cursor to be deleted and the cursor to
move into that position.

Margin bell

Factory default: Unchecked

This option applies to all emulations and it determines whether or
not an audible warning sounds when the cursor reaches a specified

Summary of Contents for TeemTalk Terminal Emulator 7.0





















































































































































































































































































































































Search results

Summary of Contents for TeemTalk Terminal Emulator 7.0

Reviews:

Related manuals for TeemTalk Terminal Emulator 7.0

Brands by name

Popular brands

HP TeemTalk Terminal Emulator 7.0, User Manual

Search results

Summary of Contents for TeemTalk Terminal Emulator 7.0

Reviews:

Related manuals for TeemTalk Terminal Emulator 7.0

Brands by name

Popular brands