HP TeemTalk Terminal Emulator 7.0 User Manual Download Page 184

Page: 184 / 340

IBM 3270 Display Emulation

168

Record & Playback Keystrokes Facility

Error Codes

The following error codes may appear on the status line if an error
occurs during recording or playback.

9001

Exceeded the maximum number of allowed keystrokes.

Remedy: Press the

Record

key to exit Record mode. To

record a new keystroke sequence, either:

- Press the

Record

key and the target

key that has

erasable data, then enter the new data, or:

- Press the

Record

key and the target

key that has

erasable data, then press the

Delete

key to erase the recorded

data for that key.

9003

You pressed an invalid

key while performing the Record

or Play function.

Remedy: Press the

Reset

key.

9007

You pressed an invalid sequence key (e.g.

Play

) while per-

forming the Record function.

Remedy: Press the

Reset

key.

9010

While performing the Play function, you pressed an

key

that does not have a keystroke assigned to it.

Remedy: Press the

Reset

key.

9015

In communication mode, you pressed either the

Quit

Pause

key.

Remedy: Press the

Reset

key.

9019

In Record or Play mode. While the Record/play pause indi-
cator was displayed on the status line you pressed an invalid
key (e.g.

Play

key in Record mode, or

Record

key in Play

mode).

Remedy: Press the

Reset

key.

Summary of Contents for TeemTalk Terminal Emulator 7.0





















































































































































































































































































































































Search results

Summary of Contents for TeemTalk Terminal Emulator 7.0

Reviews:

Related manuals for TeemTalk Terminal Emulator 7.0

Brands by name

Popular brands

HP TeemTalk Terminal Emulator 7.0, User Manual

Search results

Summary of Contents for TeemTalk Terminal Emulator 7.0

Reviews:

Related manuals for TeemTalk Terminal Emulator 7.0

Brands by name

Popular brands