HP TeemTalk Terminal Emulator 7.0, User Manual

Page: 110 / 340

VT Series Emulations
94 Setup Options
This option specifies the character set used for display when the
Character set
option is set to
PC Ansi
. Note that selecting the ANSI
BBS emulation will automatically set the preferred font to
PC Ansi
.
Each code page consists of two tables of characters. The first table is
the standard ASCII character set. The second table contains special
characters which differ between the code pages.
When
PC Hebrew (862)
is selected, the following key functions will
be enabled:
Ctrl + Alt + F1 Select Multinational 8-bit mode and left-to-
right typing.
Ctrl + Alt + F2 Select National 7-bit mode (lowercase English
characters will be displayed as Hebrew) and
right-to-left typing.
Ctrl + Alt + F3 Toggle between left-to-right and right-to-left
typing.
Multinational mode
Factory default: Checked
This option will only be available if the system is configured for a
language that supports national replacement character sets.
The setting of this option determines the type of character set used to
generate characters. When unchecked, TeemTalk is in National
mode in which a character set specific to the selected keyboard
nationality is used. When checked (default) TeemTalk is in Multina-
tional mode in which a character set consisting of two tables of char-
acters is used. This enables characters from any keyboard nationality
to be generated.
Lines per screen
Factory default: 24
This specifies the number of text rows that can be viewed in the
workspace at any one time out of the total number stored in memory.