HP TeemTalk Terminal Emulator 7.0 User Manual Download Page 297

Page: 297 / 340

Command Line Options

Window Appearance

281

Add the System
Menu

Command Line:

+sys

This will add the system menu to the display. Note that the title bar
must be enabled.

Remove/Disable
Minimize Button

Command Line:

-mnb

This will remove or disable the minimize button. Note that the win-
dow frame will also be removed.

Add/Enable
Minimize Button

Command Line:

+mnb

This will add or enable the minimize button. Note that the system
title bar and system menu must be enabled.

Remove/Disable
Maximize Button

Command Line:

-mxb

This will remove or disable the maximize button. Note that the win-
dow frame will also be removed.

Add/Enable
Maximize Button

Command Line:

+mxb

This will add or enable the maximize button. Note that the system
title bar and system menu must be enabled.

Remove the Menu
Bar

Command Line:

-mnu

This will remove the menu bar from the display.

Remove the File
Menu

Command Line:

-mfi

This will remove the

File

menu from the menu bar.

Remove the Edit
Menu

Command Line:

-med

This will remove the

Edit

menu from the menu bar.

Summary of Contents for TeemTalk Terminal Emulator 7.0





















































































































































































































































































































































Search results

Summary of Contents for TeemTalk Terminal Emulator 7.0

Reviews:

Related manuals for TeemTalk Terminal Emulator 7.0

Brands by name

Popular brands

HP TeemTalk Terminal Emulator 7.0, User Manual

Search results

Summary of Contents for TeemTalk Terminal Emulator 7.0

Reviews:

Related manuals for TeemTalk Terminal Emulator 7.0

Brands by name

Popular brands